How To Fix Nutribullet Motor

Imagine waking upwards with a huge appetite for your favorite smoothie or any other potable. You turn on your NutriBullet, and it just won't start, or it turns on, blitz for a few seconds, and it stops.

You will definitely be disappointed and tend to panic over what could be going on with your trusted NutriBullet.

The fact that your NutriBullet stopped working may exist due to:

Accidental unplugging
You might have overloaded your NutriBullet cup
Broken rubber seals leading to food leaks
Food debris might cause the blades to jam
You might too be operating with a spoilt blender cord or a broken cup tab, among other reasons

Wondering why your NutriBullet stopped working? To find out what could have happened to your NutriBullet, how you can fix the trouble, plus other interesting data, read on!

Read More: Latest NutriBullet reviews

Why has My NutriBullet Stopped Working?

Every bit with many electronics, the main reason your NutriBullet could have stopped working is near likely related to user errors such as overloading and overusing your blender.

If you purchased a pre-owned NutriBullet, the reason it stops working could be an overdue service time, or faulty blades, cords, and broken parts. For detailed information, keep reading!

Why Did My NutriBullet Turn Off While Blending?

For starters, you may be worried almost your NutriBullet when it suddenly stops working. Going off while operating is something mutual amongst blenders.

If your NutriBullet turns off when you are blending your smoothie, in that location could be several reasons backside information technology. They include:

Unplugged Wire

You might accept stretched your NutriBullet way too far from the ability socket that the wire unplugged itself, causing your NutriBullet to stop working.

Check the power supply cord; if unplugged from the ability socket, plug it back, and move your blender closer to the power source to avoid repeating the incident.

Read More: NutriBullet Vs Ninja – which is better?

Worn Out Parts & Stripped Wires

Your NutriBullet could have stopped working considering parts of the blender are old and worn out, and wires may have been stripped.

To confirm, y'all should unplug the NutriBullet from the power socket every bit a safety precaution earlier doing annihilation else.

Confirming whether your NutriBullet wires are stripped or whether you may be having worn-out internal parts is a uncomplicated procedure that you tin do at home.

Remove the casing of your blender by turning the powerbase upside downwardly and unscrew it. Once all the screws are out, remove the plastic base from your blender.

After opening up the base of your NutriBullet, you volition have a chance to explore the inside and confirm whether the wires have been stripped.

You may need to replace the wires and the worn-out parts if possible or generally buy a new blender.

Read More: Is Your NutriBullet Leaking? 7 Causes & Piece of cake Fixes

Overloading The Cup Of Your NutriBullet

NutriBullet blenders are designed with a maximum line drawn on the cup, which serves as a user guide limiting you from adding ingredients beyond the line.

Calculation ingredients across the maximum line in the NutriBullet cup ways that you have overloaded the blender; hence it may fail to rush.

Try removing the excess ingredients to ensure they are below the maximum line. Adding ingredients to the right amount will preserve the service life of your NutriBullet.

Adding Hard Foods In Your NutriBullet

Adding hard nutrient such equally nuts and ice in your NutriBullet may be a reason why the NutriBullet has stopped working.

Unless you lot purchase NutriBullet Pro designed for grinding whole nuts or any other loftier-powered NutriBullet, the blades of your regular NutriBullet may fail to cutting through the hard food.

Apply soft foods such as fresh fruits and veggies in your blender while preparing your smoothie and add enough liquids to ease the blending.

Read More: Can yous put ice in a NutriBullet?

You lot Ran The NutriBullet For Besides Long

Running your NutriBullet for also long tin cause it to stop working. The blades of a NutriBullet are powered by a motor that all-time operates by running your NutriBullet in $.25.

The motors of your NutriBullet could terminate working as a result of burnout if you run your blender for likewise long at a go.

thirty -lx seconds are the safest running menstruum for a NutriBullet. Take breaks afterward this catamenia or before making any ability increment.

If your NutriBullet has stopped working before due to running it for besides long, at present you know what to practise.

Cleaved Prophylactic Seal

The gasket underneath the extractor of your NutriBullet may be broken, which could be a reason your NutriBullet stopped working. Hither is how;

Broken gaskets made of rubber seal means the loving cup of your NutriBullet will loosely be attached to the powerbase or will non adhere at all.
Loose attachment means that the activators built at the powerbase will non sense the NutriBullet cup, and hence the blender will not run.

If the safety seal is broken, replace it immediately to avoid further damage to your NutriBullet.

Jammed Activators

Your NutriBullet has stopped working considering the activators that link the NutriBullet cup to the powerbase are stuck.

Nutrient leakage could jam the activators causing the NutriBullet to stop working, or you might have stock-still the NutriBullet cup wrongly.

All you need to practise is pour some vegetable oil, vinegar, alcohol, or hot water into the three activators.

Using a q tip, try pressing on the activators to cheque whether they tin motion downwardly. Repeat the process until you can hands press the activators downwardly and they become functional.

Read More: Is the NutriBullet dishwasher rubber?

Can I Return My NutriBullet To The Buy Store If It Stops Working?

Yes, if your NutriBullet has stopped working, you tin can take it to the purchase store for repair or replacement if it is inside your warranty period.

Alternatively, if you just purchased the NutriBullet and it is non working, y'all may return information technology to the store you bought it from for replacement.

Some stores, such as BestBuy and Costco, amongst many others, allow customers to return electronics every bit long as they run across all the gear up exchange and return policy requirements.

NutriBullet Stopped Working – Final Thoughts

NutriBullet blenders have a long service life if properly used. Human errors such as overloading, overusing, or blending hard foods may cause a NutriBullet to cease working.

If your NutriBullet has stopped working, check with your service amanuensis for any repair that seems a safe risk.

Read More: Why does my NutriBullet smell like burning safety?